The new metallic color masterbatches from Tosaf Color Service put an end to the previously typical and undesirable streaks and similar surface defects on plastic parts. The key to this lies in the manufacturer's compounding know-how acquired over the last few decades in combination with the special effect pigments with a rheologically optimized geometry that have only recently become available. As a result, these masterbatches meet the requirements for the cost-cutting, environmentally friendly use of components with brilliant metallic finishes in visible areas. The new masterbatches are available on different carrier systems and, at short notice, in customized shades. They are suitable for all transparent thermoplastics, whereby the brilliance increases with the degree of transparency. They can, however, also be used in opaque plastics such as PC/ABS or PA/ABS blends. The further developed pigment technology makes a major contribution to the considerable reduction in the separation effects that are responsible for streak formation or color deviations, especially in critical areas such as weld lines, cross-sectional transitions or with distinctly three-dimensional, concave or convex contours. The main beneficiaries of this are suppliers to the automotive industry and other segments with extremely high quality demands and with rapidly changing designs that are geared to individuality. Depending on the demands, moldings produced with this masterbatch stand out through their color depth and outstanding surface gloss and also through a delicate structure when eroded molds are used. In many applications, they can replace coated or electroplated parts, which not only saves costs through the elimination of additional work steps, but also makes a considerable contribution to the preservation of the environment. Added to this is the good suitability of the single-sort parts for recycling

What makes the P120smart stand out: Precise water temperature control up to 120 °C in a compact design | Available with high-flow pump | Stable heating performance and efficient cooling capacity for stable process temperatures Technical Highlights: Temperature range: water up to 120 °C | Heating: 8 kW (400V) | Cooling: DK / 160 kW | Pump: CM5-4, 105 l/min

Black and colored plastics place the highest demands on the separation of plastics recycling. With the widespread NIR sensor technology, the near-infrared spectrum reflected by the plastic is evaluated. Each type of plastic has a characteristic spectrum and can be identified, sorted and finally recycled. Up to now there has been a big problem with black and dark-colored plastics: the soot used for blackening in plastics absorbs a large part of the radiation both in the visible and in the infrared wavelength range. So far, it has not been possible to obtain a sufficient signal from black and dark-colored plastics and consequently these cannot be differentiated and sorted according to types of plastic. Characteristics: COTREP* – certified Suitable for all processing methods Food law approved The end product can also be laser marked Suitable for black and dark colors Technical properties are not negatively affected Soot-free colors ISO 9001,14000, 22000, 13485 certified production

Similar to black polymer products and packaging, silver-coloured ones can also cause problems in the recycling process. Due to their composition, certain shades of silver are not recognised and correctly sorted by the disposal company via near-infrared (NIR) in the post-consumer phase. Despite being recyclable, these products are therefore at risk of being disposed of thermally instead of being assigned to recycling. Lifocolor has developed new solutions in collaboration with Eckart, a leading manufacturer of metallic effect and pearlescent pigments. Using special silver and metallic masterbatches, it has been proven that formulations that could not be detected without the corresponding ingredients can now be recognised and sorted using near-infrared. Lifocolor advises on how the silver colour must be formulated to ensure successful Design4Recycling.

Seit mehr als 30 Jahren fertigen wir Lamellenräder / No Crush Wheels aus Hochleistungspolyurethanen. Unsere Lamellenräder kennzeichnen sich durch besondere dynamische- und thermische Eigenschaften und eine sehr hohe Abriebfestigkeit aus. Neben einem umfangreichen Sortiment an bestehenden Gießformen haben wir zudem die Möglichkeit unsere Lamellenräder mechanisch nach Ihren Vorgaben anzupassen und beispielsweise Kerne aus Aluminium einzuarbeiten.

By connecting the mold temperature control circuits in one movement, the MCI manual plates optimize the mold changing times, and boost the efficiency and safety of processes. The plate is equipped with flush face couplings, ensuring the non-spill of cooling and heating fluids, in the environment during connection and disconnection operations. A variety of configurations makes it easy for the integration of this compact solution on the installation.

Nozzle Band Heaters find their usage at injection moulding machinery in the polymer processing industry. They melt dense and safeguard the temperature on the crucial spots. They are further suitable for Hot Runner tools, for transferring tubes with bitumen processing, for bag sealers, for filling devices (food industry) and for special purpose machinery manufacture. They are proven as reliable OEM equipment for several common machinery types.

DH400 Areas of application: Heating nozzles on injection molding machines Wide range of applications in mechanical and mold engineering Heating of pipelines Design: Heating wire with special MIKANIT insulation, encased in a stainless steel sheath Special features: Long service life Easy installation Completely enclosed, plastic-tight design Available with built-in thermal sensor Variable cable lengths and outlets available Operating temperature max. 350°C DH500 Areas of application: Heating long nozzles on injection molding machines Heating melt lines in extrusion and other pipelines Design: Heating wire with special MIKANIT insulation, encased in 0.3 mm thick sheet steel, clamping band made of 0.5 mm stainless steel sheet Special features: Long service life Easy installation from axial and radial directions Available with built-in thermal sensor Variable cable lengths Available Operating temperature max. 350°C DH600 Areas of application: Heating nozzles on injection molding machines Wide range of applications in mechanical and mold engineering Heating pipelines Special features: Faster heating due to high power density Long heater life due to very high mechanical stability Shorter machine downtimes, higher productivity Design: Completely enclosed, plastic-tight Available with built-in thermal sensor Variable cable lengths and outlets available Operating temperature max. 600°C

Nozzle heating bands are electrical heating elements that are used in the plastics processing industry. Depending on the application, the nozzle heaters guarantee a homogeneous temperature curve and are designed according to the application to maintain the viscosity of a wide variety of materials and to guarantee uniform processing. For high melting temperatures (PVC, glass fiber reinforced) and for corrosive materials (PVC), we recommend using stainless steel heating elements. All heating elements can optionally be equipped with an integrated type J or K thermocouple. They are available in brass, stainless steel or ceramic jacket materials, depending on the required application or operating temperature.

Nucleating agents are used to reduce the crystallization and processing temperature in the manufacture of products from semi-crystalline polymers. Through their use, energy and production costs as well as throughput times can be reduced.