The expert panels are composed of representatives from companies and InCamS@BI. Current research, application possibilities, and new developments are discussed in a confidential format. The focus is on sharing experiences and mutual support. The expert panels also serve to initiate collaborations and joint projects between companies and Bielefeld University of Applied Sciences and Bielefeld University. Currently, expert panels are held on the topics of "Circular Economy in Corporate Strategy," "Innovation Forum," and "Plastics and the Circular Economy."

Grain patterns borrowed from nature or graphically abstracted Plastic surfaces that perfectly imitate natural materials can be created by adding color and particles in combination with structures. The surface grains appear deceptively real, but have cost advantages over their natural and therefore expensive twins. “In addition, the flexibility of plastics offers extended possibilities for shaping the products,” says Tonnecker. He mentions wood, stone and woven fiber structures, matt and contrasting, glossy or transparent for corresponding substitutions, which can also be used to expand the areas of application. Another focus of current design trends is graphic surfaces or graining, which are created using geometric and sometimes microscopically small patterns strung together. “They appear handcrafted and at the same time convey technical precision,” says Tonnecker, describing their special appeal. “Dark color nuances and tones that convey the absence of light and thus heaviness often contrast with light and iridescent colors,” he describes, citing as examples foils that have an effect on the surface, for example on furniture or technical housings.

acad prototyping Making ideas reality - prototypes in injection molding technology Driven by Improvement: Progress is not achieved by definition, but only by proof. Prototypes are the ideal way to obtain product confirmation and validation through a variety of testing possibilities and to identify further development needs. The selection of the manufacturing process for prototypes depends on the maturity of the product development and the required validation. Whenever it is necessary to test series-identical strength and rigidity, as well as the processing influences typical of injection molding, original series materials and injection molding technology are the first choice. Prototypes for product development: acad prototyping quickly and cost-effectively produces plastic injection molding prototypes from original series materials that provide all the necessary results for validation, confirmation or further development of the product and manufacturing technology. Our plastic parts originate from a unique tooling and manufacturing technology that is close to the development stage. quality as well as time and cost advantages for product development. What we offer: Our customers benefit from short lead times, favorable tooling costs and ease of modification. Initial samples of individual parts or entire assemblies can be completed within as little as 5 AT. These can be used to comprehensively assess warpage, sink marks, yield lines, dimensions and tolerances, as well as the basic function, strength and rigidity of the article. to be comprehensively assessed. In addition, small test assemblies from 50 to 2,000 parts can be produced extremely economically due to the low tooling costs, even with high article complexity.

For customers who require additional digital control and support options, the Gate 6 interface server offers a wide range of powerful functions. Gate 6 provides unlimited access to all of HB Therm's digital services, such as remote connections and analysis data transfer, which contribute to detailed monitoring and control of the units. The following functions are available to customers using Gate 6 in combination with the e cockpit app: - Remote Control - Remote Access - Remote Support - Send analysis data:

Tool making – customised, efficient and safe We efficiently and punctually fulfill your tool orders every day in a two-shift system covering an area of around 800 m². This results in approximately 150 tools per year, which are stored and protected against fire and damage. We always guarantee short-term production and are also happy to assist you in the manufacture of customized tools. Do you need a tool? We can bring your wish into shape.

The optimal solution for minimizing radiation and convection!

In particular when processing special or high-performance plastics, gas emissions that are hazardous to health, such as aldehydes and phosphines, can occur for procedural reasons. Our flue gas extraction device R300 is equipped with high-quality activated carbon filter cartridges. Even the tiniest of molecules adhere to the surface of these special filters. With its rotatable and pivoting extraction arm, the flue gas extraction device offers the greatest amount of flexibility as well as point-source extraction of hazardous substances directly at their point of origin.

Solutions for the Extraction of Ozone and Nitrogen Oxides In the context of plasma and corona treatment processes, larger amounts of ozone and nitrogen oxides (NOx) can be produced. At Tantec, we take the health aspects of these emissions very seriously and continuously develop customized extraction solutions that are specifically tailored to individual requirements. The FlensAir series from our subsidiary FlensTech for smoke and gas extraction is ideally suited for the direct capture of pollutant-laden air at its source. We offer specially developed system solutions and specific designs that are quickly and precisely manufactured using 3D printing technology. By using up to seven filter stages, particles, smoke, fine dust, and process gases are effectively removed and, after cleaning, safely exhausted, for example. After an extensive development phase, we proudly present our innovative and compact localized extraction system for plasma surface treatment. This specialized system effectively addresses the problem of eliminating hazardous gases such as ozone and nitrogen oxides directly at their point of origin. In our own 3D printing production, we place particular emphasis on materials with flame-retardant properties and high dimensional stability under heat. Thanks to our flexible manufacturing techniques, we can accommodate individual customer requirements and offer even more efficient solutions. Our extraction hoods are adaptable and are suitable for both single plasma nozzles and systems with multiple nozzles.

During extrusion and coextrusion procedures, thermoplastic profiles are generated for use in various fields of application. Depending on the specifications, these procedures particularly assure optimal properties. The own PVC material compounding enables us very flexibly to your requirements. The extrusion method also permits the production of profiles from mineral-reinforced or fiber-reinforced materials. Profile weights from 10.0 g – 6,000 g/m Manufacture of profiles up to 700 mm width Coextrusion and multi-layered coextrusion in combination with hard and/or soft plastics Saving time and costs by inline packing (e.g., drilling, punching, printing) Production of silicon profiles

Unsere Extrusionsanlagen ermöglichen eine zuverlässige und reproduzierbare Serienfertigung. Durch abgestimmte Prozesse und kontinuierliche Qualitätskontrollen gewährleisten wir konstante Profilqualität.

With the SLine, MLine and JLine series extrusion systems and the corresponding accessories, flexible handling solutions for small, medium-sized and heavy workpieces can be realised in gripper construction.

High-precision mould bases from high-grade steel that has been heat-treated for stress relief. Lever slots on cavity plates without extra charge. The consistent Meusburger hole patterns offer space for cooling holes, guiding and screw holes. In many cases, the use of the next larger mould is prevented by side-drilled mould bases with almost quadratic space utilisation.

Lengthwise moulds with pre-drilled guide holes are the reliable basis for precise and high-quality standard mould bases. All sizes, from 96 x 96 up to 996 x 1196 mm, are available at Meusburger.